FERROFISH VERTO64 – 64×64 ADAT<>Dante Converter
Dante is the de-facto standard for networking audio devices. With the VERTO64 it is now possible to integrate up to 64 x 64 channels via ADAT I/O’s into a Dante network in the simplest way. No matter which ADAT device – the VERTO64 makes all 64 x 64 channels immediately available “plug and play” in the Dante network.
The ultra compact device offers a total of 16 optical ADAT TOSLINK jacks: 8 for transmitting from ADAT to Dante and another 8 jacks for the return path.
On the Dante side there are two RJ45 jacks, prepared for redundant operation. The VERTO64 supports up to 96kHz sample rate, MIDI jacks for firmware updates and BNC word clock jacks for external synchronization.
- 64×64 ADAT channels on 8×8 optical TOSLINK ports
- 64×64 Dante channels via dual Ethernet ports with redundancy (pri/sec)
- MIDI I/O for firmware updates via MIDI-USB interface
- Word clock I/O on BNC with factory-set termination of the input (75 Ohm)
Two other Verto versions are available:
32×32 ADAT Interfaces: VERTO 32
64×64 MADI Interfaces: VERTO MX
An additional 19″ rack mount kit is available here.