Beschreibung
Dantify your equipment. All of it!
The VERTO 64 is a high-quality solution to connect a wide range of ADAT equipment to a Dante/AES67 network with up to 96 kHz. The ultra-compact device is an easy way, to enable Dante connectivity to an existing live or studio setup.
The VERTO 64 provides 8 ADAT I/Os – each with 8 channels – for 64 x 64 channel operation. The converter features an additional Word Clock I/O and is easily remote controlled via the network connection and MIDI.
Thanks to the array of 16 “Lightpipe” connections, the VERTO 64 can integrate several studio devices or a loaded stage box into the Dante network. It can simply turn ADAT-equipped devices, like the RME Firefaces or DIGIface, into fully functional Audio-over-IP computer interfaces.
Connected to a Dante network, the VERTO 64 is immediately detected with all 128 I/Os and automatically configured. This way every room with a LAN connection can be used for recording or mixing – simply plug the device into the network and start to work – with full Dante fail-safe Two-Port-Redundancy.
Thanks to the small footprint, any Verto converter fits easily into mobile setups and can be always carried as Dante connection kit for complete stage boxes.
An additional rack mount kit is available here.
Ferrofish offers a feature-identical version with 32 ADAT I/Os: VERTO 32
IP Networks everywhere. Use them.
Dante Plug & Play Eco System
Remote Control via Network
ADAT I/O Channels
<>
Dante I/O Channels
8 x ADAT I/O (TOSLINK)
Each ADAT port can transfer eight channels at a sample rate of 48 kHz (= 64 In + 64 Out channels). With 96 kHz it is possible to convert 32 Dante I/O to ADAT (S/MUX2).
MIDI I/O
MADI and Dante data streams can be used to send and receive embedded MIDI messages. A very useful feature, to remotely control MIDI equipment in the studio rack or on stage from the FOH.
Word Clock I/O
Set to on by default – can be changed with the remote software via the network connection.
Dante Network I/O (redundant)
Dante I/O
- 2x RJ-45 Ethernet port (PRIMARY/SECONDARY), 1 GBit Network
- 64 x 64 channel I/O (Dante Brooklyn II board built-in)
ADAT I/O
VERTO 32: 4x ADAT Input + 4x ADAT Output, optical TOSLINK
Channel count:
- 32×32 channels at 48kHz,
- 16×16 channels at 96kHz
VERTO 64: 8x ADAT Input + 8x ADAT Output, optical TOSLINK
Channel count:
- 32×32 channels at 48kHz
- 16×16 channels at 96kHz
MIDI I/O
- 2 x DIN5 connector for MIDI embedding/de-embedding
Wordclock I/O
- BNC: 1 x input, 1 x output
- 75 Ohm Termination set by default (switchable via Dante)
Power Supply
14.4VA (1.2A at 12V)
- Polyfuse internal, self-resetting
- 1 x power supply included
Operation
- Temperature range: 41°F up to 113°F (+5°C up to +45°C)
- Humidity: <75%, non-condensing
Weight/Size
- Weight: 0,9 kg
- Dimensions: 22 x 9 x 4,5 mm (without rack ears)
Optional accessories
- 19“ Rack mountain kit, metal (for mounting 1 x Verto in a 19” rack-space)
- Multi-range Power Supply 12V (EU)
- ADAT Cable Locking Plate (Part. No. 7027)
VERTO64
Dantify your equipment!
Seamless integration of up to 2 x 8 ADAT devices into the fastest growing
Audio-over-IP Eco System.
B-Stock
